How to Slide a Longboard?

There are a few things you need to know before you start sliding your longboard. First, you need to make sure that your board is properly waxed. This will help create a smooth surface for you to slide on. Second, you need to find a good spot to start sliding. A flat, paved area is ideal. Third, you need to know how to properly stop sliding. You don’t want to just slam on your brakes and come to a screeching halt. Instead, you want to gradually slow down until you come to a stop.

What You Need

-A longboard

-Wax

-A flat, paved area

Instructions:

1. Wax your longboard. This will help create a smooth surface for you to slide on.

2. Find a good spot to start sliding. A flat, paved area is ideal.

3. Push off and start sliding.

4. To stop sliding, gradually slow down until you come to a stop. Don’t just slam on your brakes!

Proper Stance

Decide your stance the most common stance is the goofy foot.

-If you stand with your left foot forward, then you are a regular foot.

-If you stand with your right foot forward, then you are a goofy foot.

Commonly, people will find that they can push better with their dominant foot leading (regular), but they can slide better with their non-dominant foot leading (goofy).

experiment with both stances and see what feels best for you.

Pushing Off

Once you have your stance down, it’s time to start sliding. To do this, you’ll need to push off with your back foot. Start by putting your back foot on the tail of the board. Then, bend your knees and push off with your back foot. As you’re pushing off, make sure to transfer your weight to the front of the board. This will help keep the board from sliding out from under you.

Sliding

Now that you’re moving, it’s time to start sliding. To do this, simply lean back and shift your weight to the back of the board. This will cause the board to start sliding. As you’re sliding, make sure to keep your weight balanced. If you start to lean too far back, the board will stop sliding. If you lean too far forward, you’ll end up falling on your face.

Types of Slides

Below mentioned are  the different types of slides you can do on a longboard:

Nose Slide:

To do a nose slide, simply place your front foot on the nose of the board and lean back. The board will start to slide and you’ll end up sliding on your front foot.

Tail Slide:

To do a tail slide, place your back foot on the tail of the board and lean back. The board will start to slide and you’ll end up sliding on your back foot.

180 Slide:

To do a 180 slide, start by sliding in one direction. Then, use your front foot to spin the board around 180 degrees. The board will now be sliding in the opposite direction.

360 Slide:

To do a 360 slide, start by sliding in one direction. Then, use your front foot to spin the board around 360 degrees. The board will now be sliding in the same direction.

Coleman Slides

Coleman slides are a type of slide that is done on a longboard. To do a Coleman slide, start by sliding in one direction. Then, use your front foot to spin the board around 180 degrees. The board will now be sliding in the opposite direction.

Hands-Down Slides

In a hands-down slide, the rider will put their front hand down on the ground while sliding. This is done to help keep the rider from falling over.

Stopping

When you’re ready to stop sliding, there are a few things you need to do. First, you need to transfer your weight to the front of the board. This will help keep the board from sliding out from under you. Next, you need to gradually slow down. You don’t want to just slam on your brakes and come to a screeching halt. Instead, you want to gradually slow down until you come to a stop.

Unweight the Wheels

The next step is to unweight the wheels. To do this, simply lift your back foot off the ground and transfer your weight to the front of the board. This will cause the wheels to come off the ground and stop sliding.

Kicking Out (The Weight Shift)

Kicking out seems pretty simple, but there’s a lot of technique involved. The first thing you need to do is transfer your weight to the back of the board. This will cause the front of the board to lift off the ground.

Choosing a Sliding Longboard

It is important to choose the right longboard for sliding. The board should be stiff and have a lot of grips. It should also be able to take a beating. You don’t want to buy a cheap board that will break after a few slides.

There are a few things to look for when choosing a sliding longboard:

Deck:

The deck should be stiff and have a lot of grips. It should also be able to take a beating. You don’t want to buy a cheap board that will break after a few slides.

Wheels:

The wheels should be large and soft. This will help with grip and speed control.

Bearings:

The bearings should be fast and smooth. This will help with speed control and make slides easier.

Trucks:

The trucks should be stiff and have a lot of turning ability. This will help with making slides easier.

Sliding Gloves: Are they necessary?

Sliding gloves are not necessary, but they can help you grip the board better and protect your hands from getting scraped up. If you decide to get sliding gloves, make sure they fit snugly and have a lot of grips. You don’t want them to be too loose or they’ll fall off when you’re sliding.

How to Power Slide on a Longboard

There are two main types of slides on a longboard – power slides and standup slides. Power slides involve using your weight to generate speed and momentum, while standup slides rely more on technique and balance. In this article, we’ll focus on power sliding.

When done correctly, power slides can be an exhilarating way to carve turns and navigate tight spaces. They can also help you build up speed and momentum for other tricks. Plus, they just look really cool. Here’s how to do a power slide on a longboard:

1. Start by picking up some speed. You’ll need to generate enough momentum to make the slide happen, so get going nice and fast.

2. As you approach your chosen spot to slide, start shifting your weight to the back foot. This will help you initiate the slide.

3. When you’re ready, quickly transfer your weight to the front foot and begin leaning into the turn. It’s important to do this quickly and smoothly – if you hesitate, you’ll lose momentum and won’t be able to slide.

4. Keep your weight on the front foot and continue leaning into the turn. You should feel your longboard begin to slide out from under you.

5. As you keep sliding, start transferring your weight back to the rear foot. This will help you control the slide and prevent you from wiping it out.

6. When you’re ready to exit the slide, start shifting your weight back to the front foot and begin straightening out your body. This will help you slow down and eventually stop.

How to Standup Slide on a Longboard

There are a few different ways that you can stand up and slide on a longboard. The easiest way is to start by standing in the middle of your board and then simply shifting your weight to one side or the other. This will cause your longboard to start sliding in that direction. You can then use your feet to control the speed and direction of your slide.

Another way to stand up and slide on a longboard is to start by standing at the back of the board and then lean forward until your weight is evenly distributed between both trucks. This will cause your longboard to slide forward. You can then use your feet to control the speed and direction of your slide.

How to Slide on a Longboard without Gloves

There are several ways to slide on a longboard without gloves. One way is to use your bare hands. Another way is to use gloves that have been specifically designed for sliding.

If you are going to use your bare hands, you will need to make sure that your hands are very dry. Moisture on your hands can cause you to lose grip and slide off the longboard. You should also keep your hands as close to the center of the longboard as possible. This will help you maintain balance and control.

If you choose to use gloves, there are a few things to keep in mind. First, make sure that the gloves fit snugly. Loose gloves can cause you to lose grip and slide off the longboard. Second, choose gloves that have a good amount of tread. This will help you grip the longboard better. Third, make sure that the gloves are made from a breathable material. This will help keep your hands cool and dry while you are riding.

Conclusion:

To sum up, becoming skilled at longboard sliding is an exciting journey that requires dedication, perseverance, and a focus on safety. By carefully following the steps provided in this guide and perfecting your technique, you’ll be able to perform slides with confidence and flair. It’s important to prioritize security at all times, so be sure to wear appropriate protective gear and practice in cool environments. With a hard job and a love for the sport, you can open the exciting world of longboard sliding and elevate your riding abilities. So, get out there and enjoy the ride!