How to Put Longboard Trucks on a Skateboard in 2024?

It’s not as difficult as it may seem to put longboard trucks on a skateboard, and there are a few different ways that you can do it. In this article, we will explore “How to Put Longboard Trucks on a Skateboard”. The first thing that you need to do is remove the old trucks from your skateboard. To do this, you will need to unscrew the bolts that hold the trucks in place. Once you have removed the old trucks, you will need to measure the width of your skateboard deck so that you can purchase the correct size of longboard trucks. In this article, we will explore “How to Put Longboard Trucks on a Skateboard”.

How to Put Longboard Trucks on a Skateboard?

Assuming your skateboard is compatible with longboard trucks, the next step is to remove the existing trucks. To do this, simply unscrew the nuts that hold the trucks in place and carefully pull them off of the deck.

When you have the correct size of trucks, you will need to put them on your skateboard deck and screw them in place. Make sure that you tighten the screws securely so that your trucks will not come loose while you are skating. Once your trucks are on, you will need to adjust the kingpin so that it is in the correct position. The final step is to tighten all of the nuts and bolts on your trucks so that they are secure.

Here are the steps to put longboard trucks on a skateboard:

• Skateboard deck
• Longboard trucks (typically reverse kingpin trucks)
• Skateboard wheels
• Skateboard bearings
• Skateboard grip tape
• Skateboard hardware (screws and nuts)
• A skate tool or a wrench
• A screwdriver

Instructions:

Choose the Right Trucks:

Assure that you have longboard trucks that are compatible with your skateboard deck. Longboard trucks are typically wider, so make sure they match the width of your skateboard deck.

Remove the Old Trucks:

If you’re replacing existing skateboard trucks, use your skate tool or twist to remove the old trucks from your skateboard deck. Remove the nuts and bolts that hold the trucks in place.

Apply Grip Tape (if necessary):

If you’re changing the trucks on a new deck or need to reapply grip tape, lay the grip tape onto the deck and use a skateboard-specific grip tape tool or the border of a hard object to smooth out any bubbles or crumples.

Position the Trucks:

Place the longboard trucks onto the skateboard deck, confirming that the holes on the baseplate of the trucks align with the holes on the deck. Make sure the trucks are evenly spaced and parallel to each other.

Insert and Tighten Hardware:

Insert the screws through the holes in the trucks and the deck. On the bottom of the deck, place the nuts onto the screws. Use your skate tool or a screwdriver and wrench to tighten the nuts until the trucks are securely attached to the deck. Be sure not to overtighten, as this can damage the deck.

Attach Wheels:

Insert the skateboard bearings into the wheels if they aren’t already installed. Then, slide the wheels onto the axles of the trucks. Confirm that the wheels spin freely without wobbling

Adjust Tightness (Optional):

Longboard trucks often have flexible tightness using a kingpin nut. You can use your skate tool to adjust the tightness of the trucks to your selection. Looser trucks allow for easier carving and turning, while tighter trucks provide more strength.

Test and Fine-Tune:

Before riding, give your board a test on a silky, flat surface to confirm everything is in working order. If necessary, make further adjustments to the tightness of your trucks.

What happens if you put longboard trucks on a skateboard?

If you put longboard trucks on a skateboard, the skateboard will be less maneuverable and have a lower turning radius. This is because longboard trucks are designed for stability and speed, while skateboard trucks are designed for tricks and turns. As a result, your skateboard will not perform as well when doing tricks or trying to make sharp turns.

Additionally, your skateboard may be more likely to wobble or shake, and you may have a harder time controlling it. If you’re looking to do tricks or make sharp turns, we recommend using skateboard trucks. However, if you’re just wanting to cruise around and go fast, longboard trucks will work just fine.

Video Guide

People Also Asked :