Element Trucks Review – An Honest Outlook in 2024
Skateboard trucks can be hard to figure out at first, but once you learn a few basic things, it’s one of the easiest decisions you can make when you build a skateboard. You can find the best skateboard trucks with this little guide. Buying trucks for the first time? Make sure you get a pair with axle widths that match the width of your skateboard deck as closely as possible.
Element makes technical skate decks, complete street skateboards, cruiser boards, skateboard wheels, and other skateboard parts and tools for people who like to skate. They are known in the skateboarding community because they offer good value for the money. At less than $100, you get a good-quality truck and many good parts, including wheels, and bearings made by Element.
Johnny Schillereff started it in the early 90s as a small company called Underworld Element in Atlanta, which was called Element Skateboards. Underworld was all about urban hip-hop culture, art, music, and design, bringing together and catering to many different artists.
There were also problems for the company that it had to close down. Element (without “Underworld”) was then re-launched around the skating lifestyle by Johnny, who concentrated on product development and marketing for skateboards, as well as creating a strong team of riders under the moniker Element (without “Underworld”).
Element Component Bundle Skateboard Trucks
Generally, high trucks are the norm, but some skateboard truck brands like Royal and Destructo also make high and low trucks. Most of the time, you’ll only see this if the model you’re looking at has both a high and a low version. A high truck makes it easier to turn and gives you a little more space for bigger wheels, so you don’t have to worry about wheel bite. For example, the front/outer and rear/inner holes are equally spaced from the plate’s edge. It’s weird because most trucks I’ve seen have had the inner holes pushed to the edge of the base plate.
![Element Trucks Review](https://skateboardwarriors.com/wp-content/uploads/2022/03/Element-Trucks-Review.jpg)
If you look at the bottom, baseplate, or board side bushing, a 45-degree angle on all of its edges touches the hanger. I’ve never seen a factory bushing with a slope like that before. Regarding bushings, the bottom edge of the lower bushing is squared up with sharp corners, and there are machining markings on the lower bushing as well.
According to the appearance, the bottom of the bushing was shaped into the form of a lathe or something similar. Compared to Indys, they are significantly lighter, which may be preferable if you like a more lightweight one. But they don’t feel cheap to me. Since most trucks now come in different sizes, not all of them need to be raised. With an aluminum pin, it will be lighter and more durable. However, be careful not to choose a hollow kingpin that isn’t very good.
Why Choose Element Trucks? 🙄
- The start of the turn is speedy, but it quickly dies down, making it very hard to turn. But it does not compare to a Tracker-style turn, and it’s not even close to being smooth like Indy or Venture. When you pop ollies, it feels weird and mushy. This might be because the fulcrum is in the middle of the baseplate.
- I don’t think grinding is that great, but it’s not terrible either. This piece of metal is a little thin. I can’t say how long it will last because of grinding. This could be a problem because the metal is so thin.
- The trucks are good enough to learn on, worth the points or savings, and far from the worst trucks I’ve ever been on, but not the best. Choose a set for your child or yourself if it’s the only thing available at a store.
What’s special? 💎
- It has more than just the essential parts. They are called risers for a reason. They are used to keep the skates off the ground and act as shock absorbers. This will make the ride less or no vibration at all. Risers are small and rectangular-shaped pieces of hard plastic or rubber made to look like wood, stone, or metal. The thickness of the risers will show how well they will be able to absorb the impact. The thicker, the better.
- Each riser has six screw holes to keep it in place, and it fits both small and longboards. This way, you can always keep the risers in place between the main deck and the base plate. In addition, when you ride a longboard or have bigger wheels, you’ll get a wheel bite when you make sharp turns. The bumps will be quickly absorbed with risers installed, giving you a smooth ride. Even though they may not completely stop vibrations while skating, they can help in many cases.
Pros
- I think element trucks are good because they can break things down
- Grinder, ledge, or handrail won’t be an issue
- They do well and are strong
Cons
- A little bit heavy in construction
Final verdict:
The trucks are made of aluminum and have a kingpin and axles made of grade 8 steel. They are high quality and may be used for heavy riding and tricks. Miniature rectangles of hard plastic or rubber that resemble wood, stone, or metal. They keep the skates off the ground and absorb impact. These trucks, on the other hand, have a more excellent finish than the other vehicles on my list, and they appear to be more attractive. They perform just as effectively, however. They are well-known in the skateboarding community as they are famous for their low pricing rates.
Frequently Asked Questions
Are Element trucks good?
Yes, element trucks are of great quality and may be utilized for a variety of activities, including hard riding and many skateboarding tricks when combined with more advanced equipment, such as Independent or Thunder trucks, high-end wheels such as Bones, Ricta, or OJ, and Bones Reds bearings.
Who makes Element skateboards?
Element Skateboards is an American company that makes the best skateboard pop decks, clothes, and shoes. It was founded in 1992 by Johnny Schillereff. In 2014, Element was born and moved to The Branch, a creative space in Costa Mesa, California.
Where are element decks made?
In 2016, PS Sticks, a renowned woodshop led by skateboarding manufacturing expert Paul Schmitt and having locations in the United States and Mexico, manufactured the decks for Elements Skateboards (as of 2016).